We have a couple of places where we don't tween the actor, but a
custom property on the delegate object. In order to move those
to Clutter animations, we will need an animatable, so turn those
objects into widget subclasses.
The set_brightness() method is the most convenient way of controlling
the effect's brightness, but Clutter animations only deal with properties,
so start using the (ClutterColor) brightness property instead.
Currently WindowDimmer exposes a JS property that is used to control the
underlying effect. This works fine with Tweener, but not with Clutter
animations which we want to use ultimately.
As a first step towards that, expose a setDimmed() method instead of
the property and handle the animation internally, so it can be adapted
more easily.
Florian Müllner [Sat, 10 Jun 2017 00:52:12 +0000 (02:52 +0200)]
environment: Add convenience method for implicit animations
Setting up implicit animations is more verbose than using tweener, in
particular when setting up a callbacks to run on overwrite or completion.
In order to make its use more convenient, monkey-patch ClutterActor
with an ease() method that works similarly to Tweener.addTween().
Florian Müllner [Wed, 4 Jun 2014 22:13:14 +0000 (00:13 +0200)]
environment: Support slow down factor when easing
Being able to slow down animations is a helpful debugging tool; to not
lose it when starting to use Clutter's implicit animations, monkey-patch
the appropriate methods to support our global slow down factor.
Florian Müllner [Wed, 4 Jun 2014 22:13:14 +0000 (00:13 +0200)]
environment: Add adjustAnimationTime() helper
As we currently use Tweener for all animations, we have a single place
for hooking up the enable-animations and slow-down-factor settings.
However that will no longer hold true when we'll start to use Clutter's
built-in animation facilities, so add a small helper function that
applies the necessary adjustments.
Notifications use a transition that overshoots the target value, however
we can only really do that for the position and not the opacity where
some values would end up out of the valid range.
We currently address this by proxying the actual opacity property in a
javascript property, and clamp it to the valid range in an onUpdate()
callback.
This won't be an option if we want to use Clutter animations, so instead,
use separate tweens for opacity and position.
Florian Müllner [Sun, 4 Aug 2019 23:02:38 +0000 (01:02 +0200)]
pageIndicators: Defer IN animation until redraw
Unlike Tweener, which doesn't know or care about actor state, Clutter
will skip implicit animations on actors that aren't mapped. This makes
sense of course, but it will break the page indicator animation we
do on map: When we get notified about the container being mapped, the
individual indicators (which are the actors being animated) are still
unmapped.
Resolve this by deferring the animation to a LaterFunc.
For animating the arrows on the screenshield, we currently use a custom
transition function that tweens the opacity from 0 to maxOpacity in the
first half of the animation, and from maxOpacity back to 0 in the second
half.
This doesn't easily translate to Clutter's own animation framework, so
replace the custom transition with two consecutive tweens which do.
Dash items are currently animated via the custom "childScale" and
"childOpacity" properties. However since commit efb3025d8cdb, those
properties actually control the scale-x/scale-y and opacity properties
of the actor itself (not the child), so cut out the intermediate
custom properties in favor of the "real" ones.
Florian Müllner [Sat, 10 Jun 2017 02:32:22 +0000 (04:32 +0200)]
popupMenu: Split submenu expansion and arrow rotation
When expanding a submenu, we currently use a single tween to animate
both the submenu actor and the source arrow. We do this by tweening
a monkey-patched JS property on the main actor, which we then use
to update the arrow's GObject property on updates. As Clutter cannot
animate random JS properties, this trick will prevent us from using
implicit animations here.
The only reason I can think of for using a single tween is to keep
both animations in perfect lock step, but as expansion and rotation
are visually quite distinct, this shouldn't be required, so just
set up separate animations for each actor.
Florian Müllner [Tue, 6 Aug 2019 11:19:59 +0000 (13:19 +0200)]
shell-app: Consider desktop actions in can_open_new_window()
We currently only consider a remote "app.new-window" action when running,
but not a fixed "new-window" action in the .desktop file. The latter is
clearly useful as well, in particular as open_new_window() already does,
so add it.
We start with a dim factor of 0, so the syncEnabled() call in the
constructor will always disable the effect. Just create the effect
disabled and save the method call.
barLevel: Don't reset value on overview-start changes
While it makes sense to cap the current value to a new maximum value,
I can't think of a good reason why changing the overdrive-start should
reset the current value to that.
The time computation isn't just unnecessary in that case, it's likely
wrong as well: If we don't have a valid allocation, we may well end
up with a negative value, NaN or Infinity.
Now that redisplaying is a lightweight operation that only
adds and removes what changed, we can not be concerned about
redisplaying on folder changes.
Redisplaying will be necessary when custom order in the app
grid is implemented, in order to update not only which icons
are hidden, but also their position.
FolderView and AllView currently check if the item is
present in the BaseAppView._items map, in order to avoid
adding the same icon multiple times.
Now that BaseAppView._loadApps() has a different role --
it returns a list with all app icons, and BaseAppView
diffs with the current list of app icons -- checking the
BaseAppView._items map is wrong.
Make sure there are no duplicated items in the temporary
array returned by all _loadApps() implementations. Remove
the now unused BaseAppView.hasItem() method.
BaseAppView currently removes all icons, and readds them, every
time the list of app icons needs to be redisplayed. In order to
allow animating app icon positions in the future, however, we
cannot destroy the actors of the app icons.
Previous commits paved the way for us to do differential loading,
i.e. add only the icons that were added, and remove only what was
removed.
Make the BaseAppView effectively implement differential loading.
The BaseAppView.removeAll() method is removed, since we do not
remove all icons anymore. BaseAppView._loadApps() now returns an
array with the new apps, instead of putting them directly at the
BaseAppView lists.
Now that the three views follow the exact same loading routine
(remove all + load apps + load grid), we don't need each view
call loadGrid() directly anymore.
This is an important step in order to animate adding and removing
icons, since now we can diff old and new app icons properly.
Move all calls to BaseAppView.loadGrid() to a single one after
BaseAppView._loadApps(). Also add the underscore prefix, since
this is now considered a protected function.
frequentView: Use BaseAppView.addItem() and loadGrid()
FrequentView is another view that is slightly not unified with how
BaseAppView expects subclasses to load app icons. Instead of using
BaseAppView.addItem() and then calling BaseAppview.loadGrid(), it
adds the app icons directly to the icon grid.
Make FrequentView add icons using BaseAppview.addItem(), and load
the icons using BaseAppView.loadGrid().
Future patches will diff the old and new icons of views, in order to
animate them when necessary (e.g. adding an app icon to a folder, or
from a folder back to the app grid). In order to do that, all views
must be streamlined in how they load app icons.
Currently, FrequentView and AllView are already following the behavior
expected by BaseAppView, but FolderView isn't. Its icons are loaded by
FolderIcon, and FolderView doesn't implement BaseView._loadApps(),
which makes it impossible to diff old and new apps.
Move the app icon loading routine from FolderIcon to FolderView, by
implementing the _loadApps() method.
Florian Müllner [Thu, 1 Aug 2019 23:13:10 +0000 (01:13 +0200)]
cleanup: Use milliseconds for animation times
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
Benjamin Berg [Fri, 19 Apr 2019 22:21:55 +0000 (00:21 +0200)]
data: Update systemd units
The existing units were never used as the corresponding support was
never merged into gnome-session.
This commits updates units to be usable with the newer gnome-session
unit definitions. Also added is appropriate failure/restart logic
including the ability to disable extensions. Note that extensions will
only be disabled if a failure happens in the first two minutes after
login.
Benjamin Berg [Mon, 5 Aug 2019 19:46:05 +0000 (21:46 +0200)]
data: Flag in desktop file that gnome-shell can be started using systemd
As gnome-shell is a required component for GNOME sessions, gnome-session
will currently always try to autostart it. However as we are moving towards
using systemd's user instance for session startup, gnome-session should only
be responsible for launching the shell when either not running under systemd
or when we were built without systemd support.
gnome-session can detect the former but not the latter, so communicate this
via the newly added X-GNOME-HiddenUnderSystemd key in the .desktop file.
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
`g_object_notify()` actually takes a global lock to look up the property
by its name, which means there is a performance hit (albeit tiny) every
time this function is called. For this reason, always try to use
`g_object_notify_by_pspec()` instead.
We currently assume that user icons are square, which is the case when
set by the users settings panel, but not enforced by AccountsService.
Handle that case by moving the pixel size back to the actor and using
an appropriate background-size style property of 'cover' (which means
the smallest dimension of the image is scaled to fit the desired size).
A generic, introspectable Shader effect is not only more flexible
than a shader actor, it will also make it much easier to turn
Lightbox into an actor subclass and replace Tweener with Clutter's
own animation support.
Jonas Dreßler [Sat, 27 Jul 2019 17:29:36 +0000 (19:29 +0200)]
shellDBus: Use floats instead of percentages for OSD levels
Due to typecasting being done when converting floats to integers in
gnome-settings-daemon, a volume of 0.9% in g-s-d will end up as 0% in
gnome-shell. This can lead to a mismatch of icons between the volume OSD
(the icon to use is determined by g-s-d itself) and the shells own
volume indicator (the icon to use is determined by the shell using the
volume received from g-s-d).
To fix this, simply get rid of the conversion from float to percentage
in g-s-d and back to floats in the shell and just send a float/double
value on DBus.
verdre [Sat, 2 Feb 2019 16:58:47 +0000 (17:58 +0100)]
osdWindow: Remove LevelBar and use BarLevel directly
LevelBar is not really used, all the checks are implemented inside
BarLevel as well and the accessible name is wrong because the osdWindow
doesn't only show the volume, but also the brightness and other things.
The workaround for updating the bars width is also no longer needed now
that we have BarLevel.
verdre [Sat, 2 Feb 2019 17:01:56 +0000 (18:01 +0100)]
barLevel: Return when trying to set value to already used value
There are some cases (for example when tweening value changes), where
the level will be set to the same value it already is at. Avoid those
unnecessary repaints by checking whether the value is already used and
returning if it is.
The check is supposed to run for all merge requests that touch javascript
files, but for some reason I see it's skipped quite often. Better have
the test run unnecessarily some times than let bugs through, so remove
the limitation.
AppIcon makes itself draggable, and handles the various DnD
routines such as 'drag-begin' and 'drag-end' by making the
Overview emit the appropriate signals.
However, when destroyed, the AppIcon does not try to finish
any drag operations that started. That causes the event
blocker in AllView not to be updated correctly when dragging
icons to outside folders.
Make AppIcon emit 'item-drag-end' when a drag operation
started and it's destroyed.
Florian Müllner [Sun, 30 Jun 2019 11:05:04 +0000 (13:05 +0200)]
ci: Add eslint job to review stage
We have now reduced the number of eslint errors enough to add it to
the CI pipeline. There are still plenty of errors left though, so we
cannot simply run eslint and fail on any errors. So instead, run it
through a fancy script that:
- generates an eslint report using the "regular" configuration
- generates an eslint report using the "legacy" configuration
- creates a combined report with errors common to both configurations
When the pipeline is running for a branch or tag, the final report is
printed out and the job succeeds (we know there are errors left);
when the pipelne is running for a merge request, we fail if any errors
are reported for the lines modified/added by the MR.
GNOME apps use 'review' for the CI stage that generates and exports a
flatpak bundle after a successful build, so they need some other name
for anything that is checked before building; that's how we ended up
with the somewhat awkward 'source_check' stage (inherited from Polari).
But since the commit log check added a 'review' stage that runs pre-build,
use that for all checks that are performed before the build stage.
Florian Müllner [Sat, 29 Jun 2019 13:14:37 +0000 (15:14 +0200)]
perf: Shut up another eslint error
The functions here are asynchronous to handle control back to the
mainloop while waiting for an action to complete, not to run operations
in parallel. That is, the race condition the rule is protecting against
isn't an issue here, so disable the error.
Florian Müllner [Fri, 1 Feb 2019 00:16:20 +0000 (01:16 +0100)]
style: Disable camelcase rule for GObject properties
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
Florian Müllner [Thu, 31 Jan 2019 14:07:06 +0000 (15:07 +0100)]
cleanup: Mark globals used from other modules as exported
eslint cannot figure out that those symbols are used from other modules
via imports, so they trigger unused-variable errors. To fix, explicitly
mark those symbols as exported.
Florian Müllner [Thu, 31 Jan 2019 14:08:00 +0000 (15:08 +0100)]
cleanup: Mark unused (but useful) variables as ignored
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
Florian Müllner [Mon, 4 Feb 2019 11:30:53 +0000 (12:30 +0100)]
cleanup: Remove some unhelpful unused arguments
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
Florian Müllner [Mon, 28 Jan 2019 00:37:12 +0000 (01:37 +0100)]
lint: Allow marking variables/arguments as unused
Unused variables or arguments can indicate bugs, but they can also
help document the code, in particular in case of signal handlers
and destructuring.
Account for this by keeping the error, but set up patterns that allow
us to opt out of if for individual variables/arguments. For arguments
we pick a '_' prefix, while for variables we go with a suffix instead,
to not accidentally exempt private module-scope variables.
This was left-over in commit 2743f18af, and probably is the real reason
why the busy spinner wasn't using the shared AnimatedIcon.Spinner class:
The animation there was much slower.
Still, let's keep the code as-is for now, if we really need a different
animation time, we can add an optional constructor parameter to the
Spinner class.
Ray Strode [Thu, 18 Jul 2019 18:49:30 +0000 (14:49 -0400)]
appDisplay: Stop watching FolderIcon parent view when destroyed
When a FolderIcon is opened, it asks the parent view to allocate
space for it, which takes time. Eventually, the space-ready
signal is emitted on the view and the icon can make use of the new
space with its popup. If the icon gets destroyed in the
interim, though, space-ready signal handler still fires.
This commit disconnects the signal handler so it doesn't get called
on a destroyed icon.
Ray Strode [Mon, 22 Jul 2019 14:57:57 +0000 (10:57 -0400)]
appDisplay: Add destroy handler for FolderIcon
It is important that the FolderView of a FolderIcon always
gets destroyed before the AppFolderPopup, since the view
may or may not be in the popup, and the view should
get cleaned up exactly once in either case.
This commit adds a destroy handler on FolderIcon to ensure
things get taken down in the right order, and to make sure
the view isn't leaked if it's not yet part of the popup.
Ray Strode [Mon, 22 Jul 2019 15:02:10 +0000 (11:02 -0400)]
appDisplay: Add AppFolderPopup destroy handler
At the moment AppFolderPopup calls popdown on destruction,
which leads to open-state-changed getting emitted after
the actor associated with the popup is destroyed.
This commit handles ungrabbing and closing from an
actor destroy handler to side-step the open-state-changed
signal.
Ray Strode [Mon, 15 Jul 2019 17:52:58 +0000 (13:52 -0400)]
appDisplay: Don't leak duplicate items in AppView
If an icon already exists in an app view with the same id, the
duplicate is not added on a call to addItem. Unfortunately,
since it's not added, the icon actor gets orphaned and leaked.
This commit address the problem by introducing a new hasItem
method and disallowing callers to call addItem with a duplicate
in the first place.
projects / gnome-shell.git / log